AT&T MERLIN 410 Service Manual page 35

3. Return to the call on hold. To do this:
Touch the line button next to the fluttering green light. The green light should
light steadily.
4. End the call. To do this:
Replace the handset; the green light should go off.
5. If you have more than one outside line, place an outside call on each of the remaining
outside lines. To select a different outside line:
Touch the desired line button (Figure 20). The red light next to the line button
should go on.
Pick up the handset and listen for dial tone. The green light next to the line button
should go on.
Dial the number.
MODEL 206
MODEL 410
5–BUTTON
VOICE TERMINAL
OUTSIDE
LINES
5–BUTTON
VOICE TERMINAL
OUTSIDE
LINES
Figure 20
Installation (cont'd)
10– AND 34–BUTTON
VOICE TERMINALS
10– AND 34–BUTTON
VOICE TERMINALS
31