Dell PowerConnect J-Series J-EX8216 Ethernet Switch Hardware Guide
Table 18: Status LEDs on Line Cards for J-EX8200 Switches
LED
Color
ON
Green
Yellow
Unlit
ST
Green
Yellow
Unlit
Related
Documentation
Network Port LEDs in a J-EX8200 Switch
36
Figure 20: Status LEDs on 48-port RJ-45 Line Card
Table 18 on page 36 describes the status LEDs on line cards for the J-EX8200 switch,
their colors and state, and the status they indicate.
State and Description
The line card is enabled/online.
The line card is disabled/offline.
There is no power being supplied to the line card.
On steadily—The line card is functioning normally.
Blinking—The line card is booting.
On steadily—There is a line card failure or alarm.
Blinking—The line card is in diagnostic mode.
The line card is disabled/offline.
8-port SFP+ Line Card in a J-EX8200 Switch on page 32
48-port SFP Line Card in a J-EX8200 Switch on page 33
48-port RJ-45 Line Card in a J-EX8200 Switch on page 34
Network Port LEDs in a J-EX8200 Switch on page 36
Each network port on the faceplate of a line card in a J-EX8200 switch has two LEDs.
Figure 21 on page 37 shows the network port LEDs on an 8-port SFP+ line card.