Installing Switch Components; Installing And Removing J-Ex8216 Switch Hardware Components - Dell PowerConnect J-EX8216 Hardware Manual

CHAPTER 9

Installing Switch Components

Installing and Removing J-EX8216 Switch Hardware Components

Installing and Removing J-EX8216 Switch Hardware Components on page 113
Installing an AC Power Supply in a J-EX8200 Switch on page 114
Installing a Fan Tray in a J-EX8216 Switch on page 116
Installing an RE Module in a J-EX8216 Switch on page 118
Installing an SF Module in a J-EX8216 Switch on page 120
Unpacking a Line Card Used in a J-EX8200 Switch on page 122
Installing a Line Card in a J-EX8200 Switch on page 123
Installing a Transceiver in a J-EX Series Switch on page 126
Connecting a Fiber-Optic Cable to a J-EX Series Switch on page 127
The field-replaceable units (FRUs) in a J-EX8216 switch are:
Routing Engine (RE) modules
Switch Fabric (SF) modules
8-port SFP+ line card
48-port SFP line card
48-port RJ-45 line card
AC power supplies
Fan trays
SFP transceiver
SFP+ transceiver
The FRUs in a J-EX8216 switch are hot-insertable and hot-removable: you can remove
and replace these components while the switch is functioning without turning off power
to the switch or disrupting the switching function. However, we recommend that you
take the RE modules and the line cards offline before you remove them. SF modules
must be taken offline before removing them. See "Field-Replaceable Units in a J-EX8216
Switch" on page 25 for details.
113