CHAPTER 9
Installing Switch Components
Installing and Removing J-EX8208 Switch Hardware Components
Installing and Removing J-EX8208 Switch Hardware Components on page 113
Installing an AC Power Supply in a J-EX8200 Switch on page 114
Installing a Fan Tray in a J-EX8208 Switch on page 116
Installing an SRE Module in a J-EX8208 Switch on page 118
Installing an SF Module in a J-EX8208 Switch on page 120
Unpacking a Line Card Used in a J-EX8200 Switch on page 121
Installing a Line Card in a J-EX8200 Switch on page 122
Installing a Transceiver in a J-EX Series Switch on page 125
Connecting a Fiber-Optic Cable to a J-EX Series Switch on page 126
The field-replaceable units (FRUs) in a J-EX8208 switch are:
Switch Fabric and Routing Engine (SRE) module
Switch Fabric (SF) module
8-port SFP+ line card
48-port SFP line card
48-port RJ-45 line card
AC power supplies
Fan tray
SFP transceiver
SFP+ transceiver
The SRE module and SF module are hot-removable or hot-pluggable depending on the
configuration of the switch. See "J-EX8208 Switch Configurations" on page 6.
All the line cards are hot-removable and hot-insertable. However, we recommend that
you take them offline before removing them.
113