2. Basic Commands
2.26 Full screen representation(ON/OFF), Write
Description
Enable/disables the full screen representation
Command
Command [0]
Command [1]
Sent Data
Data[0] : one byte : 0 = OFF ; 1 = ON
2.27 Full screen representation (ON/OFF), Read
Description
Reads whether the Full screen representation is enabled or not
Command
Command [0]
Command [1]
Reaturned Data
Data[0] : one byte : 0 = OFF ; 1 = ON
2.28 Keystone, Write
Description
Adjusts the keystone
Command
Command [0]
Command [1]
Data
Signed word representing the keystone value.
Data[0] = msb
Data[1] = lsb
Example
Sets the keystone to "0"
Transmit
Start
Projector address
Command[0]
Command[1]
Data[0]
60
\x20
\xae
\x21
\xae
\x20
\x50
\xfe
\x01
\x20
\x50
\x00
R5976884 RLM SERIES 04/04/2006