Vco, Increment; Vco, Decrement - Barco RLM series User Manual

Command [0]
Command [1]
maximum active pixels
Command [0]
Command [1]
minimum pixel start
Command [0]
Command [1]
maximum pixel start
Command [0]
Command [1]
minimum clamp width
Command [0]
Command [1]
maximum clamp width
Command [0]
Command [1]

3.31.10 VCO, Increment

VCO
The Voltage Controlled Oscillator is used in a Phase Locked Loop which allows to synchronise the data pocessing
with the incoming source data.
Description
Increments the VCO by one
Command
Command [0]
Command [1]

3.31.11 VCO, decrement

VCO
The Voltage Controlled Oscillator is used in a Phase Locked Loop which allows to synchronise the data pocessing
with the incoming source data.
Description
Decrements the VCO by one.
R5976884 RLM SERIES 04/04/2006
3. Advanced Commands
\x26
\x5d
\x27
\x5d
\x26
\x5e
\x27
\x5e
\x26
\x68
\x27
\x68
\x22
\xa8
149