Pip Window Size, Write - Barco RLM series User Manual

3. Advanced Commands
for composite video:
Byte value
0
1
2
3
4
5
6
for Svideo:
Byte value
100
101
102
Data[2], Data[3] = Xsize word
Data[4], Data[5] = Ysize word
Data[6], Data[7] = Xposition word
Data[8], Data[9] = Yposition word
Xsize, Ysize, Xpos, Ypos are given in "pixels"
for a graphics projector version : x = 1 ...1024 ; y = 1..768
Note that the panel size (projector version) can be read using the Panel size command, "Panel size, Read ",
page 159
Xsize and Ysize determine the size of the window, since the aspect ratio is fixed, one of the values may be
sufficient to determine the size of the window.
If the 2 values do not match the aspect ratio, then Xsize is taken as reference and Ysize is calculated to match
the aspect ratio.
Data[10] = byPriority byte: 0 =Top ;...; 3= Bottom

3.2.16 PiP window size, Write

Description
Resizes the active window (works in PiP and in Full Screen mode) by keeping the same aspect ratio.
102
Mode
Video BNC
Vertical sync BNC
Red BNC
Green BNC
Blue BNC
SVideo Y
SVideo C
Mode
SVideo 1
SVideo on R & B
SVideo on Vs and Video BNC
R5976884 RLM SERIES 04/04/2006