Color Temperature Red/Bleu, Write; Color Temperature Red/Bleu, Read - Barco RLM series User Manual

2. Basic Commands
Example
Decrement the Red color temperature of a projector with address \x01 by one.
Transmit
Start
Projector address
Command[0]
Command[1]
Checksum
Stop

2.32.3 Color temperature Red/Bleu, Write

Description
Writes a custom value for the different color temperatures to the projector
Commands
Red color temperature
Command [0]
Command [1]
Blue color temperature
Command [0]
Command [1]
Data
Unsigned word (2byte: msb-lsb).see chapter "1. Serial communications Basics", "Data words", page 6
Data [0] = unsigned byte( msb)
Data [1] = unsigned byte(lsb)

2.32.4 Color temperature Red/Bleu, Read

Description
Reads the color temperature setting for the different colortemperatures from the projector
Commands
reads Red color temperature
Command [0]
Command [1]
reads Blue color temperature
Command [0]
Command [1]
Send Data
Data[0] = unsigned byte representing the colortemperature to be read
70
\xfe
\x01
\x23
\x43
\x67
\xff
\x20
\x43
\x20
\x44
\x21
\x43
\x21
\x44
R5976884 RLM SERIES 04/04/2006