Pip Free Window Size, Write - Barco iCon H250 User Manual

3.1.1

PiP free window size, Write

Description
Allows the free re-sizing of the active window (works in desktop and in Full Screen mode) i.e the aspect ratio may be changed.
Image 3-1
A Video window is re-sized (the aspect ratio is locked).
Command
Command [0]
Command [1]
Data
Data[0] = byFlag
bit0 = position : if bit0 is set to 1 the new position will be applied
bit1 = size: if bit1 is set to 1 the new size will be applied
bit2 = :return bit : if bit2 is set to 1 the new position and size will be returned by the projector.
bit3 = aspect ratio : if bit3 is set to 1 the aspect ratio will not be locked (free resizing)
Data[1]...Data[4] = signed double word XPosition : describes the start position of the window (x axis).
Data[5]...Data[8] = signed double word YPosition : describes the start position of the window (y axis).
Data[9]...Data[12] = signed double word Xsize : describes the "width" of the window (x axis).
Data[13]...Data[16] = signed double word Ysize : describes the "height" of the window (y axis).
If bit3 of byFlag is is set to 0 aspect ratio will not be altered, note that this command has then the same result
as the (standard) PiP Window size command.
Xsize, Ysize are given in "pixels"
R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250/400 16/02/2007
3. Advanced commands
\x20
\x92
99