Install Upgrades; General Instructions - Xerox 8550YDP - Phaser Color Solid Ink Printer User Manual

Install Upgrades

General Instructions

Closely follow the printed installation sheet that is packaged with each option and upgrade kit. Most
installations require access to the printer's main board, which is located inside the electronics module.
The printer and upgrade components are static-sensitive. To avoid damage,
protect them from Electro-Static Discharge (ESD) during the installation by
using an approved ESD work surface and wrist strap.
The printer's option plate must be removed to install memory DIMMs and the hard drive (Productivity Kit).
To remove the plate:
1. Turn the printer off.
2. Loosen the two thumbscrews located on the rear panel.
3. Lift the plate from the printer.
After installing an upgrade kit, always print the Configuration Page to verify
the printer recognizes the new hardware.
PHASER 8550, 8500, & 8400 SETUP SECTION
Version 1.0
This section provides general information for installing upgrades and installation tips for
installing the memory DIMMs, hard drive (Productivity Kit), and configuration upgrades.
Instruction sheets are provided with the options and upgrades. When completing this section,
refer to training CD-ROM's Resources section for electronic versions of the instruction sheets.
page 41