Available Access Filters - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Setting up End-User Access

Available Access Filters

Available Access Filters
Cisco Small Business NSS2000 Series Administration Guide
When you configure network filters, determine which protocols can or cannot
access the NSS. To display the list of available filters, click the drop-down arrow
next to the Filter field on the Network Filters page.
•
Allow All: This is the default filter. It tells the NSS to accept traffic via all
supported protocols.
•
Allow CIFS: Allow CIFS filesharing access.
NOTE: Rejecting versus Dropping Traffic:
When incoming traffic matches a "reject" filter,
the NSS drops the traffic and then sends a
notice to the initiating system of the denial of
service. When incoming traffic matches a "drop"
filter, the NSS drops the traffic but no notice is
sent to the initiating system
5
91