Configuring The Nss Network Identification - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Adding the NSS to your Network

Configuring the NSS Network Identification

Configuring the NSS Network Identification
NOTE
Cisco Small Business NSS2000 Series Administration Guide
The Network Identification page is where you configure the network identity of the
NSS, including the hostname and domain membership.
Before you join the NSS to an NTv4 or Active Directory Service (ADS) domain, do
the following:
— Configure the IP and DNS information.
— Set up your user and group ID ranges on the User/Group Settings page (from the
Manager Menu, click Access and then Options). If you make a change to the range
after the domain is joined you must rejoin the NSS to the domain after the change
is made.
— Set up the Home Directory Location on the User/Group Settings page. This is
used for any domain users as well as local users.
To configure the NSS network identity:
3
27