Configuring The Network Ports - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Adding the NSS to your Network

Configuring the Network Ports

STEP 1
STEP 2
Configuring the Network Ports
Cisco Small Business NSS2000 Series Administration Guide
From the Manager Menu, click Network
The Network Diagnostics page appears.
View the Link Status area for the test result. If the link is down, you cannot access
the Configuration Manager.
By default the NSS runs network services on their well known (IETF defined) port
numbers. You can change the port on which any particular service runs. When you
disable WAN access for a given service, only hosts on the same subnet as the
NSS may connect to that service. This is in essence a shortcut to manually
defining an equivalent network filter.
Diagnostics.
3
34