Setting Up Cifs Access - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Managing the Shares

Setting up CIFS Access

Setting up CIFS Access
STEP 1
STEP 2
STEP 3
Cisco Small Business NSS2000 Series Administration Guide
•
Windows Operating System Version: MSDFS is not supported by Windows
98 clients.
•
Windows Clients must be Restarted: After you set up a DFS root, any
Windows clients that were connected must be restarted.
Although you cannot globally disable CIFS as you can for NFS and FTP, you can
allow or disallow CIFS access on a per-share basis. The CIFS Networking
Configuration page lets you specify the length of time CIFS connections to the
NSS can be idle before being automatically disconnected.
To set up the idle disconnect time for a CIFS connection to the NSS:
From the Manager Menu, click Shares
The CIFS Networking Configuration page appears.
From the dropdown box, select the amount of time that the CIFS connection can
be idle, after which it is disconnected.
Click Update.
CIFS Setup.
6
108