Viewing The Network Settings - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Adding the NSS to your Network

Viewing the Network Settings

Viewing the Network Settings
Cisco Small Business NSS2000 Series Administration Guide
The Network Device Settings page displays information about the physical and
virtual interfaces currently configured on the NSS.
To display the Network Device Settings page, from the Manager Menu, click
Network IP. The Network Device Settings table displays the following:
•
Link: The number of the physical link attached to the NSS. It appears as 1.
•
VLAN: The ID assigned to the virtual interface. For physical interfaces, this
column is blank.
NOTE: If you hotplug the Ethernet link after
the initial installation of the NSS, make sure you
wait 15 seconds between the time you unplug
the cable and then plug it back in. The NSS
displays the correct new settings within 10
seconds.
3
17