Configuring The Email Alerts For A Recipient - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Maintaining the NSS

Configuring the Email Alerts for a Recipient

STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Configuring the Email Alerts for a Recipient
Cisco Small Business NSS2000 Series Administration Guide
If your DHCP server is configured to provide NTP settings, select "Assign
automatically via DHCP". If not, manually configure the NTP settings. In the NTP
Server fields, enter the IP address or hostname for the NTP servers you wish to
synchronize. Note that the settings in these fields are also used as a fallback if you
chose to get NTP settings from your DHCP server. The NTP servers can be
located on your network or can be public NTP servers located on the Internet.
Skip to step 6.
Click Manually.
Enter the date and time in the Date and Time fields.
Select your time zone from the Time Zone drop-down menu.
Click Update.
You can create a list of users that will receive email alerts when changes occur to
the NSS. Changes can include configuration changes (such as the addition of a
volume), physical changes (such as the removal or insertion of a disk), and
changes of state (such as a loss of power). You can customize the user's email
profile to suit the user's specific "need-to-know" requirements.
To configure the NSS for email alerts:
7
135