Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual page 77

Setting up End-User Access
Creating a User Profile
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business NSS2000 Series Administration Guide
From the Manager Menu, click Access
The Configured Users page appears. Users created from the NSS
configuration interface and provided by the ADS, NTv4, or NIS domain appear
in the Configured Users table.
Click Add to create a user.
The New User page appears.
In the Username field, type the username. The name must be made up of
alphanumeric characters (that is, a-z, 0-9), any case, to a maximum of 32
characters. This field is required.
Select the group you want to assign as the user's primary group from the Primary
Group field. If there are no groups configured, the only available choice is the
default group "nasusers". This field is required.
NOTE: Although you can assign the user to
multiple groups (through the Add Group or Edit
Group page), the primary group is the group
against which quota charges for the user's
storage usage are made and is the group that
defines the group ownership for all files created
by the user. The primary group applies to users
set up locally on the NSS. A domain user's
primary group is set up from the domain and is
not derived from the Primary Group field in the
NSS user profile.
Users.
5
69