Setting up End-User Access
Network Filters Overview
Network Filters Overview
STEP 1
STEP 2
Cisco Small Business NSS2000 Series Administration Guide
In addition to providing storage for your data, the NSS provides a configurable
firewall to protect that data. Defining network filters lets you specify which
network hosts have access to the NSS via the various supported protocols.
To view the network filters:
From the Manager Menu, click Access
The Network Filters page appears.
You can do any of the following:
•
Set the default network policy to control what happens to traffic not
explicitly covered by defined filters. See the
Policy" section on page
•
View or delete the existing filters defined for the NSS from the Active
Network Access Filters table. See the
on page
87.
•
Create a new filter based on an IP or MAC address or a range of IP
addresses. See the
Network.
88.
"Network Filters Overview" section
"Creating a Network Filter" section on page
"Defining the Default Network
89.
5
87