Usb Storage Status - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Configuring your Storage
Cisco Small Business NSS2000 Series Administration Guide

USB Storage Status

If you mount a USB flash device by inserting it into the AUX-1 port on the back of
the chassis, the USB Storage Status table appears. If there is no USB flash device
mounted, the USB Storage Status table does not appear. You can use the USB
flash device to save a backup of the configuration file. When you finish using the
USB flash device, click Unmount before you remove it from the AUX-1 port. (The
AUX-1 LED on the back of the chassis must be off before you can safely remove
the USB flash device.) If you remove the USB flash device in a mounted state, you
risk corrupting the files or filesystem.
The USB Storage Status table provides the following details about the mounted
USB flash device:
•
Disk: The type of disk in this case is the USB flash.
•
Total Space: The total amount of space (both used and available) on the
USB flash device.
•
Used Space: The amount of space taken up on the USB flash device.
•
Available Space: The amount of unused space on the USB flash device.
•
%Used: The percentage of space used on the USB flash device.
•
Action: The Unmount button unmounts the USB flash device so that it can be
safely removed from the AUX-1 port.
4
41