Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual page 37

Adding the NSS to your Network
Configuring the NSS Network Identification
Cisco Small Business NSS2000 Series Administration Guide
•
Workgroup: Make the NSS part of a peer-to-peer network.
•
NTv4 Domain: Make the NSS a part of a pre-Windows 2000 domain. If you
select this option, set up the following fields:
-
NTv4 Domain: Enter the domain name.
-
Domain Controller: Enter the hostname or IP address of the domain
controller.
-
Username: Enter the username of an account that has administrator
privileges for this domain. Note: The username cannot contain the "%"
character.
-
Password: Enter the password for the administrator account. This
password is cleared each time you click Update. You must re-enter the
password each time you edit the fields on this page to ensure the rejoin
of the domain is successful.
•
Member of Active Directory domain: Make the NSS part of an Active
Directory (ADS) domain. If you select this option, set up the following fields:
-
Active Directory Domain: Enter the domain name. Note that you might
have to use the DNS fully qualified domain name. For example,
"domain.com" versus just "domain."
-
Kerberos Realm: Enter the name of your Kerberos realm. If you are not
sure what to enter here, enter the domain name. In most standard
Windows domain installations, this is the correct value. Note that you
might have to use the fully qualified domain name for the Kerberos
Realm fields. For example, "domain.com" versus just "domain".
-
Domain Controller: Enter the hostname or IP address of the domain
controller.
-
Username: Enter the username of an account that has administrator
privileges for this domain. Note: The username cannot contain the "%"
character.
-
Password: Enter the password for the administrator account. This
password is cleared each time you click Update. You must re-enter the
domain password each time you edit fields on this page to ensure the
rejoin of the domain is successful.
3
29