Deleting A Group - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Setting up End-User Access

Deleting a Group

Deleting a Group
STEP 1
STEP 2
STEP 3
Cisco Small Business NSS2000 Series Administration Guide
When you delete a group, the group is automatically removed from having access
to any configured shares.
To delete a group:
From the Manager Menu, click Access
The Configured Groups page appears.
Before you can delete a group, you must remove any assigned users.
You can delete a group from two locations in the NSS configuration interface:
•
Groups page: Highlight the group you want to delete from the Configured
Groups table, and then click Delete. To delete multiple groups, use the
following key-mouse combination:
-
Shift-click: To select a contiguous list of groups that you want to delete,
hold down the Shift key, then click the first group, and then the last group
in the series. Click Delete to delete the highlighted groups.
-
Ctrl-click: To select a non-contiguous set of groups that you want to
delete, hold down the Ctrl key, and then click each group from the list.
Click Delete to delete the highlighted groups.
•
Edit Groups page: Select the group you want to edit, and then click Edit. The
Edit Groups page appears. Click Delete to remove the group.
Groups.
5
78