Maintaining the NSS
Restoring a Configuration File
Restoring a Configuration File
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business NSS2000 Series Administration Guide
You can easily overwrite the current configuration settings with the configuration
settings in a saved configuration file.
To restore a configuration file:
From the Manager Menu, click Admin
The Configuration Manager page appears.
If the configuration file is not located on a volume in the NSS, copy it onto a USB
flash device and then insert the USB flash device into the AUX-1 port.
From the Stored Configuration Location field, select the location of the saved
configuration file.
Click Update.
NOTE: If you restore a configuration file that
was saved in an older version of the NSS
firmware than the current version, check the
settings after you restore the file to ensure they
were updated correctly.
Configuration.
7
130