Unexporting Storage - Cisco NSS2000 - Gigabit Storage System Chassis Administration Manual

Configuring your Storage

Unexporting Storage

Unexporting Storage
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business NSS2000 Series Administration Guide
You can choose to unexport pieces of the storage currently exported to the
network. Note that you can only unexport storage that has not yet been used.
To unexport a piece of storage:
From the Master device, delete any RAID arrays (see the
section on page 46) associated with the storage you want to unexport.
Display the Configuration Interface for the slave device that contains the storage
you want to unexport.
From the Manager Menu, click Storage
The Storage Virtualization page appears.
Click Unexport for the device you want to release from the network.
The disk drive(s) or array no longer appears in the Currently Exported Storage
list. It now appears in the Export a device list and is again available for use.
"Deleting an Array"
Virtualization.
4
53