Removing And Installing The Support Bracket - IBM IntelliStation A Pro Type 6217 User Manual

Removing and installing the support bracket

When working with some devices, such as hard disk drives, adapters, and memory
modules, you must first remove the support bracket to access the device.
To remove the support bracket, complete the following steps:
1. Read safety information beginning on page v and the guidelines in "Handling
2. Remove the side cover ("Removing the side cover" on page 39).
3. Pull out on the rear end of the support bracket approximately 150 mm (6 in.).
4. Disengage the front end of the support bracket from the computer and set the
To reinstall the support bracket, reverse the previous steps.
40
IntelliStation A Pro Type 6217: User's Guide
static-sensitive devices" on page 34.
bracket aside.
94
13