Show Snmp Users - D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual

show snmp users

The show snmp users Privileged EXEC mode command displays the configuration of users.
Syntax
show snmp users [username]
Parameters
•
username—Specifies the name of the user. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of users.
Console# show snmp users
Name Group name
------ ------------
John user-group
John user-group
Auth Method
---------
md5
md5
Page 220
SNMP Commands
Remote
-------------------------
08009009020C0B099C075879