Additional References; Related Documents; Standards; Mibs - Cisco ASR1002 - ASR 1002 Router Software Configuration Manual

Additional References

Command or Action
Step 23
clock source internal
Step 24
xconnect peer-loopback vc-id pw-class pe-class-name
Ethernet-to-EtherChannel over MPLS (Bridge) Interworking mode is also supported under VLAN.
Note
Additional References
The following sections provide references related to the Frame Relay to ATM Bridged Interworking and
xconnect support on GEC (VPWS) features.

Related Documents

Related Topic
Cisco IOS commands
Basics of MPLS
MPLS Layer 2 VPNs
Cisco IOS Configuration Fundamentals

Standards

Standard
No new or modified standards are supported by this
feature.

MIBs

MIB
• CISCO-IETF-PW-MIB
CISCO-IETF-PW-MPLS-MIB
•
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
30
Purpose
Specifies that the T1/E1 link uses the internal clock
from the interface.
Binds an attachment circuit to a pseudowire to
configure an AToM static pseudowire, specifies
MPLS as the tunneling method, and enters the
xconnect configuration mode.
Document Title
Cisco IOS Master Commands List, All Releases
MPLS: Basic MPLS Configuration Guide, Cisco IOS XE Release 3S
MPLS Layer 2 VPNs Configuration Guide, Cisco IOS XE Release 3S
Cisco IOS Configuration Fundamentals Command Reference
Title
—
MIBs Link
To locate and download MIBs for selected platforms, Cisco IOS
releases, and feature sets, use the Cisco MIB Locator found at the
following URL:
http://www.cisco.com/go/mibs
Configuring MPLS Layer 2 VPNs