Additional References - Cisco NCS 5000 Series Manual

Additional References

Configuring a User-Defined Template to Reference a User-Defined vty Pool: Example
This configuration example shows how to configure a user-defined line template (named test2 in this example)
for vtys and to configure the line template test to reference a user-defined vty pool (named pool1 in this
example):
line template test2
exec-timeout 0 0
session-limit 10
session-timeout 100
transport input all
transport output all
exit
vty-pool pool1 5 50 line-template test2
Configuring a User-Defined Template to Reference the Fault Manager vty Pool: Example
This configuration example shows how to configure a user-defined line template (named test3 in this example)
for vtys and to configure the line template test to reference the fault manager vty pool:
line template test3
width 110
length 100
session-timeout 100
exit
vty-pool eem 100 106 line-template test3
Additional References
The following sections provide references related to implementing physical and virtual terminals on
Cisco IOS XR software.
Related Documents
Related Topic
Cisco IOS XR terminal services commands
Cisco IOS XR command master index
Information about getting started with Cisco IOS XR
software
Information about user groups and task IDs
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
16
Implementing Physical and Virtual Terminals
Document Title
Terminal Services Commands on module of System
Management Command Reference for Cisco NCS
5000 Series Routers
Configuring AAA Services on module of System
Security Configuration Guide for Cisco NCS 5000
Series Routers