Ntp Server; Syslog Server; Domain Name Assignment; Dns Service - Cisco ASR1002 - ASR 1002 Router Software Configuration Manual

Common Ethernet Management Tasks
FTP Example
Router(config)# ip ftp source-interface gigabitethernet 0

NTP Server

To allow the software clock to be synchronized by a Network Time Protocol (NTP) time server over the
Management Ethernet interface, enter the ntp server vrf Mgmt-intf command and specify the IP
address of the device providing the update.
The following CLI provides an example of this procedure.
Router(config)# ntp server vrf Mgmt-intf 172.17.1.1

SYSLOG Server

To specify the Management Ethernet interface as the source IP or IPv6 address for logging purposes,
enter the logging host <ip-address> vrf Mgmt-intf command.
The following CLI provides an example of this procedure.
Router(config)# logging host <ip-address> vrf Mgmt-intf
SNMP-Related Services
To specify the Management Ethernet interface as the source of all SNMP trap messages, enter the
snmp-server source-interface traps gigabitEthernet 0 command.
The following CLI provides an example of this procedure:
Router(config)# snmp-server source-interface traps gigabitEthernet 0

Domain Name Assignment

The IP domain name assignment for the Management Ethernet interface is done through the VRF.
To define the default domain name as the Management Ethernet VRF interface, enter the ip
domain-name vrf Mgmt-intf domain command.
Router(config)# ip domain-name vrf Mgmt-intf cisco.com

DNS service

To specify the Management Ethernet interface VRF as a name server, enter the ip name-server vrf
Mgmt-intf IPv4-or-IPv6-address command.
Router(config)# ip name-server vrf Mgmt-intf IPv4-or-IPv6-address
RADIUS or TACACS+ Server
To group the Management VRF as part of a AAA server group, enter the ip vrf forward Mgmt-intf
command when configuring the AAA server group.
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
6
Using the Management Ethernet Interface