Using Issu To Upgrade Subpackages - Cisco ASR1002 - ASR 1002 Router Software Configuration Manual

ISSU Upgrade for Redundant Platforms
Deleting file
bootflash:asr1000rp1-sipbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file
bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file bootflash:packages.conf.00- ... done.
Deleting file bootflash:packages.conf.01- ... done.
Deleting file bootflash:packages.conf.02- ... done.
Deleting file bootflash:packages.conf.03- ... done.
Deleting file bootflash:packages.conf.04- ... done.
SUCCESS: Files deleted.
Using ISSU to Upgrade SubPackages on a Cisco ASR 1006 Router or ASR 1013 Router (request platform command set)
This procedure can only be performed if the current ASR 1006 router or ASR 1013 router has two active
RPs and both RPs are running subpackages.
To perform an ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with
a dual RP setup using the request platform command set, follow the following instructions.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
46
show version
show version active-rp installed
show version standby-rp installed
dir filesystem:<directory>
show platform
mkdir URL-to-directory-name
ip tftp source-interface gigabitethernet slot/port
copy tftp: URL-to-target-location
request platform software package expand file URL-to-consolidated-package
dir URL-to-consolidated-package
copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-rpcontrol.version.pkg
URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-standby-RP
Software Upgrade Process