Cisco ASR1002 - ASR 1002 Router Software Configuration Manual page 134

ISSU Upgrade for Redundant Platforms
Command or Action
Step 11
request platform software package install rp
active-RP
file
URL-to-active-file-system
version
spa}* *.pkg slot
Repeat this step for each SIP installed in the
router before moving onto the next step.
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01.
122-33.XNB1*.pkg slot 0 force
Router# request platform software package
install rp 0 file
bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01.
122-33.XNB1*.pkg slot 1 force
Router# request platform software package
install rp 0 file
bootflash:asr1000rp1-{sipbase,sipspa}*02.02.01.
122-33.XNB1*.pkg slot 2 force
Step 12
request platform software package install rp
active-RP
file
URL-to-active-file-system
standby-ESP-slot
pkg slot
request platform software package install rp
active-RP
file
URL-to-active-file-system
active-ESP-slot
pkg slot
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*.
pkg slot 1
Router# request platform software package
install rp 0 file
bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*.
pkg slot 0
Step 13
request platform software package install rp
active-RP
file
URL-to-active-file-system
force
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp1-rp*02.02.01.122-33.XNB1*.p
kg force
active-RP
Step 14
show version
active-RP
show version
Example:
Router# show version r0 provisioned
Router# show version r0 installed
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
52
:asr1000rp1-{sipbase,sip
SIP-slot-number
force
version
:asr1000rp1-esp*
version
:asr1000rp1-esp*
version
:asr1000rp* *.pkg
provisioned
installed
Purpose
Upgrades the SIP and SPA subpackages for each SIP on the
router.
Note This step must be completed one SIP at a time, and
repeated for each SIP installed on the router before
performing the next step.
Tip You can use the show ip interface brief command
to identify which slots contain SIPs and SPAs. The
interfaces with three numbers (in the form
SIP-number/SPA-number/interface-number)
identify the SIP and SPA locations in the router.
The pattern options used in this CLI (sipbase and
Note
sipspa) were introduced in Cisco IOS XE Release
2.1.2 and are not available in previous Cisco IOS
XE Releases.
See the "ISSU Procedures (Prior to Cisco IOS XE
Release 2.1.2)" section on page 74
IOS XE Release 2.1.2 ISSU upgrade procedures.
Upgrades the ESP Base subpackage on the standby and the
active ESPs.
*.
After entering the issu loadversion rp command on the
active RP, the ESP switchover will occur automatically.
Minimal traffic interruption will occur as a result of this
switchover.
*.
Upgrades all of the sub-packages on the active RP.
This step is required to ensure that all subpackages
Note
on the router were upgraded as part of this
procedure, and might upgrade some subpackages
that would otherwise be missed in the process.
(Optional) Confirms the subpackages are provisioned and
installed.
Software Upgrade Process
for pre-Cisco