Using Auto Refresh - Cisco ASR1002 - ASR 1002 Router Software Configuration Manual

Configuring and Accessing the Web User Interface
For additional information on the commands and the options available with each command, see the Cisco
IOS Configuration Fundamentals Command Reference Guide located at:
http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html.

Using Auto Refresh

The web user interface does not refresh content automatically by default.
To set an auto-refresh interval, follow these steps:
Check the Refresh every check box on the graphical web user interface home page. A check mark
Step 1
appears in the check box (See
Figure 7
Set the frequency of the auto-refresh interval using the drop-down menu.
Step 2
Click the Start button to the right of the drop-down menu. After hitting this button, the Start button
Step 3
becomes the Stop button and a countdown timer placed to the right of the Stop button begins to
increment (See
Figure 8
The web user interface screen refreshes every time this counter reaches 0 seconds.
If you would like to stop the auto-refresh update, click the Stop button to return to the default setting of
no auto-refresh update.
Figure 7).
Checking Auto Refresh Check Box
Figure 8).
Auto Refresh Counter Example
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Using Auto Refresh
9