Cisco ASR1002 - ASR 1002 Router Software Configuration Manual page 95
Asr 1000 series aggregation services routers
Hide thumbs
Also See for ASR1002 - ASR 1002 Router:
- Quick start manual (47 pages) ,
- Installation manual (46 pages) ,
- Configuration manual (34 pages)
Table of Contents
Advertisement
Software Upgrade Process
Using ISSU to Upgrade the SubPackages on a Cisco ASR 1006 or ASR 1013 Router (issu Command Set)
This section provides the instructions for performing an ISSU upgrade using subpackages on a Cisco
ASR 1006 router or ASR 1013 router with a dual RP setup using the issu command set.
This procedure can only be performed if the current ASR 1006 or ASR 1013 routers have two active RPs
and both RPs are running subpackages.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
Note
9.
10.
11.
show version
show version active-rp installed
dir filesystem:<directory>
show platform
show redundancy-states
copy running-config startup-config
mkdir URL-to-directory-name
ip tftp source-interface gigabitethernet slot/port
copy tftp: URL-to-target-location
request platform software package expand file URL-to-consolidated-package
dir URL-to-consolidated-package
copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp1-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
In step 6, each individual subpackage that was extracted in step 4 is copied to the directory where
the subpackages that are currently running the standby RP are stored.
copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-rpcontrol.version.pkg
URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-sipbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp1-sipspa.version.pkg URL-to-directory-of-sub-packages-standby-RP
issu loadversion rp standby-RP file URL-to-standby-file-system:asr1000rp*version*.pkg force
hw-module slot standby-RP reload
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
ISSU Upgrade for Redundant Platforms
13
Advertisement
Table of Contents
Troubleshooting
