Configuring A Destination Profile - Cisco ASR1002 - ASR 1002 Router Software Configuration Manual

Configuring Call Home
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router# configure terminal
Step 2
interface GigabitEthernet 0
Example:
Router(config)# interface GigabitEthernet0
Step 3
vrf forwarding Mgmt-intf
Example:
Router(config-if)# vrf forwarding Mgmt-intf
Step 4
ip address ip-address mask [secondary [vrf
vrf-name]]
or
ipv6 address {X:X:X:X::X link-local |
X:X:X:X::X/prefix [anycast | eui-64] |
autoconfig [default]}
Example:
Router(config-if)# ip address 10.10.10.10
0.0.0.0
What To Do Next
To find out more about the Gigabit Ethernet Management interface on the Cisco ASR 1000 Series
Routers or perform additional related configuration tasks on the management interface, see the
the Management Ethernet Interface" section on page 1

Configuring a Destination Profile

A destination profile contains the required delivery information for an alert notification. You can
configure multiple destination profiles of one or more type.
You can create and define a new destination profile or copy and use another destination profile. If you
define a new destination profile, you must assign a profile name.
The Call Home feature provides a predefined profile named CiscoTAC-1 that is inactive by default. The
Note
CiscoTAC-1 profile is intended for use with the Smart Call Home service, which requires certain
additional configuration steps to enable the service with the Call Home feature. For more information
about this profile, see the
Purpose
Enters global configuration mode.
(Required) Specifies the Gigabit Ethernet Management
interface on the Cisco ASR 1000 Series Router.
(Required) Associates the Mgmt-intf VRF with the Gigabit
Ethernet Management interface. This command is
configured by default.
(Required) Specifies the IPv4 or IPv6 addressing for the
interface.
"Using the Predefined CiscoTAC-1 Destination Profile" section on page
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
How to Configure Call Home
.
"Using
17.
5