Additional References For Cisco Discovery Protocol Version 2 - Cisco ASR 900 Series Configuration Manual

Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Sending CDPv2 advertisements is enabled
Device# show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Local Interfce
C2950-1 Fas 0/0
RX-SWV.cisco.com Fas 0/1
Device# show cdp neighbors detail
-------------------------
Device ID: C2950-1
Entry address(es):
Platform: Cisco WS-C2950T-24,
Interface: Gigabitethernet0/0,
Holdtime : 139 sec
Version :
Cisco IOS C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1, RELEASE SOFTWARE
.
.
.
Device# show cdp traffic
CDP counters :
Total packets output: 81684, Input: 81790
Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
No memory: 0, Invalid packet: 0, Fragmented: 0
CDP version 1 advertisements output: 0, Input: 0
CDP version 2 advertisements output: 81684, Input: 81790

Additional References for Cisco Discovery Protocol Version 2

Related Documents
Related Topic
Cisco IOS commands
Cisco Discovery Protocol commands
SNMP support configuration tasks
On-Demand Routing configuration tasks
Debug commands
Standards
Standard
IEEE 802.1Q
14
Holdtme Capability
148 S I
167 T S
Capabilities: Switch IGMP
Port ID (outgoing port): Gigabitethernet0/15
Document Title
Cisco IOS Master Command List, All Releases
Cisco IOS Cisco Discovery Protocol Command Reference
"Configuring SNMP Support" module
"Configuring On-Demand Routing" module
Cisco IOS Debug Command Reference
Title
Virtual LANs
Platform Port ID
WS-C2950T-Fas 0/15
WS-C3524-XFas 0/13