Modifying The Destination Context For Icsr; Configuring Bgp Router And Gateway Address In Destination Context; Configuring Srp Context For Bgp For Destination Context; Setting Subscriber To Default Mode - Cisco ASR 5500 System Administration Manual

Modifying the Destination Context for ICSR

Modifying the Destination Context for ICSR
To modify the destination context of core service:
Step 1
Add the BGP router and configure the gateway IP address, neighbor IP address, remote IP address in the destination
context where the core network service is configured, by applying the example configuration in
and Gateway Address in Destination Context, on page
Step 2
Configure the service redundancy context with BGP neighbor context and IP address to monitor the BGP link activity
by applying the example configuration in
Step 3 Set the subscriber mode to default by following the steps in
Step 4 Verify your BGP context configuration by following the steps in
on page 285.
Step 5 Save your configuration as described in Verifying and Saving Your Configuration.

Configuring BGP Router and Gateway Address in Destination Context

Use the following example to create the BGP context and network addresses.
configure
context dest_ctxt_name
Notes:
• AS_num is the autonomous systems path number for this BGP router.

Configuring SRP Context for BGP for Destination Context

Use the following example to configure the BGP context and IP addresses in the SRP context.
configure
context srp_ctxt_name

Setting Subscriber to Default Mode

Use the following example to set the subscriber mode to default.
configure
context dest_ctxt_name
ASR 5500 System Administration Guide, StarOS Release 21.5
284
Configuring SRP Context for BGP for Destination Context, on page
router bgp AS_num
network gw_ip_address
neighbor neighbor_ip_address remote-as AS_num
end
service-redundancy-protocol
monitor bgp context dest_ctxt_name neighbor_ip_address
end
subscriber default
end
284.
Setting Subscriber to Default Mode, on page
Verifying BGP Configuration in Destination Context,
Interchassis Session Recovery
Configuring BGP Router
284.
284.