Installation - AEG 41056VH-MN User Manual

If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING!
Refer to "Safety information" chapter.
Technical Data
Appliance class 2, sub class 1 and class 1.
Height
Width
Depth
Oven capacity
Voltage
Frequency
Levelling
Use small feet below drawer to set same level of
cooker top surface with other surfaces
1. Remove the drawer (Refer to chapter "Oven
Care and Cleaning")
2. Screw the screw left or right to set the cor-
rect level of each foot
3. Insert the drawer back
Incline the appliance for easier levelling
Electrical installation
WARNING!
Only a qualified and competent person must do the electrical installation.
.........................................
.........................................
.........................................
Dimensions
Installation
850 mm
600 mm
600 mm
58 l
230/400 V
50 Hz
29