Download Print this page

Installation - AEG 30006VL-WN User Manual

Hide thumbs

Advertisement

26
www.aeg.com
Problem
You cannot activate the ap-
pliance.
Residual heat indicator does
not come on.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation
settle on the food and in the
cavity of the oven.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. INSTALLATION

WARNING!
Refer to Safety chapters.
12.1 Technical data
Dimensions
Height
Width
Possible cause
The fuse is blown.
The zone is not hot because
it operated only for a short
time.
The oven is deactivated.
The necessary settings are
not set.
The lamp is defective.
You left the dish in the oven
for too long.
847 - 867 mm
596 mm
Remedy
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
If the zone operated suffi-
ciently long to be hot, speak
to an Authorised Service
Centre.
Activate the oven.
Make sure that the settings
are correct.
Replace the lamp.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
Dimensions
Depth
12.2 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
600 mm

Hide quick links:

Advertisement

loading