Local Information - NETGEAR FS728TPv2 Software Administration Manual

FS728TP Smart Switch Software Administration Manual
Click Apply to send the updated configuration to the switch. These changes occur
5.
immediately and the configuration will be saved.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
6.
the latest value of the switch.

Local Information

Use the LLDP Local Information page to view the data that each port advertises through
LLDP.
To display the LLDP Local Device Information page, click System > Advanced > LLDP >
Local Information.
The following table describes the LLDP local information that displays for each port.
Field
Interface
Port ID Subtype
Port ID
Port Description
Advertisement
Click Refresh to refresh the page with the most current data from the switch.
To view additional details about a port, click the name of the port in the Interface column of
the Port Information table.
Description
Select the interface with the information to display.
Identifies the type of data displayed in the Port ID field.
Identifies the physical address of the port.
Identifies the user-defined description of the port. To configure the Port
Description, see on page 74.
Ports
Displays the advertisement status of the port.
Chapter 2: Configuring System Information | 63