NETGEAR FS728TPv2 Software Administration Manual page 156

To configure the certificate download settings for HTTPS sessions:
From the File Type menu, select the type of SSL certificate to download, which can be
1.
one of the following:
SSL Trusted Root Certificate PEM File. SSL Trusted Root Certificate File (PEM
•
Encoded).
SSL Server Certificate PEM File. SSL Server Certificate File (PEM Encoded).
•
SSL DH Weak Encryption Parameter PEM File. SSL Diffie-Hellman Weak
•
Encryption Parameter File (PEM Encoded).
SSL DH Strong Encryption Parameter PEM File. SSL Diffie-Hellman Strong
•
Encryption Parameter File (PEM Encoded).
In the TFTP Server IP field, specify the address of the TFTP server. The address can be an
2.
IP address in standard x.x.x.x format or a hostname. The hostname must start with a letter
of the alphabet. Make sure that the software image or other file to be downloaded is
available on the TFTP server.
In the Remote File Name field, specify the name of the file to download, including the path.
3.
You may enter up to 32 characters.
Select the Start File Transfer check box.
4.
Click Apply to start the transfer. A status message displays during the transfer and upon
5.
successful completion of the transfer.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
6.
the latest value of the switch.
156 | Chapter 5: Managing Device Security
FS728TP Smart Switch Software Administration Manual