Traffic Control; Mac Filter Configuration - NETGEAR FS728TPv2 Software Administration Manual

Field
Reauthentication Enabled
Port Status
Click Refresh to update the information on the screen.

Traffic Control

From the Traffic Control link, you can configure MAC Filters, Storm Control, Port Security,
and Protected Port settings. To display the page, click the Security  Traffic Control tab.
The Traffic Control folder contains links to the following features:
MAC Filter:
•
•

MAC Filter Configuration

• MAC Filter Summary
• Storm Control
Port Security:
•
• Port Security Configuration
• Port Security Interface Configuration
• Security MAC Address
• Protected Ports Membership
MAC Filter Configuration
Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into
and out of specified ports on the system.
To display the MAC Filter Configuration page, click Security  Traffic Control, and then click
the MAC Filter  MAC Filter Configuration link.
166 | Chapter 5: Managing Device Security
Description
Displays if reauthentication is enabled on the selected port. This is a
configurable field. The possible values are true and false. If the value is true,
reauthentication will occur. Otherwise, reauthentication will not be allowed.
This field displays the authorization status of the specified port. The possible
values are Authorized, Unauthorized, and N/A. If the port is in detached
state, the value will be N/A since the port cannot participate in port access
control.
on page 166
on page 168
on page 168
on page 170
on page 172
on page 173
FS728TP Smart Switch Software Administration Manual
on page 171