NETGEAR FS728TPv2 Software Administration Manual page 194

The following table describes the detailed port information displayed on the screen. To view
information about a different port, select the port number from the Interface menu.
Field
Interface
MST ID
ifIndex
Port Type
194 | Chapter 6: Monitoring the System
FS728TP Smart Switch Software Administration Manual
Description
Use the drop down menu to select the interface for which data is to be
displayed or configured.
Displays the created or existing MSTs.
This field indicates the ifIndex of the interface table entry associated with this
port on an adapter.
For most ports this field is blank. Otherwise the possible values are:
Indicates that the port has been configured as a monitoring port
:
•
Mirrored
and is the source port in a port mirroring session. For additional
information about port monitoring and probe ports, see
on page 211.
Mirroring
Probe: Indicates that the port has been configured as a monitoring port
•
and is the destination port in a port mirroring session. For additional
information about port monitoring and probe ports, see
on page 211.
Mirroring
Port Channel: Indicates that the port has been configured as a member
•
of a port-channel, which is also known as a link Aggregation Group (LAG).
Multiple Port
Multiple Port