NETGEAR FS728TPv2 Software Administration Manual page 115

FS728TP Smart Switch Software Administration Manual
The following table describes the information available on the Querier VLAN Status page.
Field
VLAN ID
Operational State
Operational Version
Last Querier Address
Last Querier Version
Operational Max Response
Time
Click Refresh to redisplay the page with the latest information from the switch.
Description
Specifies the VLAN ID on which the IGMP Snooping Querier is
administratively enabled and for which VLAN exists in the VLAN database.
Specifies the operational state of the IGMP Snooping Querier on a VLAN:
Querier: The snooping switch is the querier in the VLAN. The snooping
•
switch will send out periodic queries with a time interval equal to the
configured querier query interval. If the snooping switch sees a better
querier (numerically lower) in the VLAN, it moves to non-querier mode.
Non-Querier: The snooping switch is in non-querier mode in the VLAN.
•
If the querier expiry interval timer expires, the snooping switch moves
into querier mode.
Disabled: The snooping querier is not operational on the VLAN. The
•
snooping querier moves to disabled mode when IGMP snooping is not
operational on the VLAN, when the querier address is not configured, or
the network management address is not configured.
Displays the IGMP protocol version of the operational querier.
Displays the IP address of the last querier from which a query was snooped
on the VLAN.
Displays the IGMP protocol version of the last querier from which a query
was snooped on the VLAN.
Displays the maximum response time to be used in the queries that are sent
by the snooping querier.
Chapter 3: Configuring Switching Information | 115