Mac Rules - NETGEAR FS728TPv2 Software Administration Manual

FS728TP Smart Switch Software Administration Manual
Optionally, use the
4.
To display the MAC ACL page, click Security  ACL. The MAC ACL page is under the Basic
link.
The MAC ACL table displays the number of ACLs currently configured in the switch and the
maximum number of ACLs that can be configured. The current size is equal to the number of
configured IPv4 ACLs plus the number of configured MAC ACLs.
To configure a MAC ACL:
To add a MAC ACL, specify a name for the MAC ACL in the Name field, and click Add.
1.
The name string may include alphabetic, numeric, dash, underscore, or space
characters only. The name must start with an alphabetic character.
Each configured ACL displays the following information:
Rules. Displays the number of rules currently configured for the MAC ACL.
•
Direction. Displays the direction of packet traffic affected by the MAC ACL, which can
•
be Inbound or blank.
To delete a MAC ACL, select the check box next to the Name field, then click Delete.
2.
To change the name of a MAC ACL, select the check box next to the Name field, update the
3.
name, then click Apply.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
4.
the latest value of the switch.

MAC Rules

Use the MAC Rules page to define rules for MAC-based ACLs. The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded. A default 'deny all' rule is the last rule of every list.
To display the MAC Rules page, click Security  ACL, then click the Basic  MAC Rules link.
MAC Binding Table page to view the configurations.
Chapter 5: Managing Device Security | 175