Lldp; Lldp Configuration - NETGEAR FS728TPv2 Software Administration Manual

LLDP

The IEEE 802.1AB-defined standard, Link Layer Discovery Protocol (LLDP), allows stations
on an 802 LAN to advertise major capabilities and physical descriptions. This information is
viewed by a network manager to identify system topology and detect bad configurations on
the LAN.
From the LLDP link, you can access the following pages:
•

LLDP Configuration

• LLDP Port Settings
• LLDP-MED Network Policy
• LLDP-MED Port Settings
• Local Information
• Neighbors Information
LLDP is a one-way protocol; there are no request/response sequences. Information is
advertised by stations implementing the transmit function, and is received and processed by
stations implementing the receive function. The transmit and receive functions can be
enabled/disabled separately per port. By default, both transmit and receive are disabled on
all ports. The application is responsible for starting each transmit and receive state machine
appropriately, based on the configured status and operational state of the port.
The Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED) is an
enhancement to LLDP with the following features:
Auto-discovery of LAN policies (such as VLAN, Layer 2 Priority, and DiffServ settings),
•
enabling plug and play networking.
Device location discovery for creation of location databases.
•
Extended and automated power management of Power over Ethernet endpoints.
•
Inventory management, enabling network administrators to track their network devices
•
and determine their characteristics (manufacturer, software and hardware versions,
serial/asset number).
LLDP Configuration
Use the LLDP Configuration page to specify LLDP and LLDP-MED parameters that are
applied to the switch.
To display the LLDP Configuration page, click System > LLDP > Basic > LLDP
Configuration.
You can also access the LLDP Configuration page by clicking
Note:
System > LLDP > Advanced > LLDP Configuration.
58 | Chapter 2: Configuring System Information
FS728TP Smart Switch Software Administration Manual
on page 58
on page 59
on page 61
on page 62
on page 63
on page 65