NETGEAR FS728TPv2 Software Administration Manual page 66

The following table describes the information that displays for all LLDP neighbors that have
been discovered.
Field
MSAP Entry
Local Port
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
System Name
Click Refresh to update the information on the screen with the most current data.
To view additional information about the remote device, click the link in the MSAP Entry field.
A popup window displays information for the selected port.
66 | Chapter 2: Configuring System Information
FS728TP Smart Switch Software Administration Manual
Description
Displays the Media Service Access Point (MSAP) entry number for the
remote device.
Displays the interface on the local system that received LLDP information
from a remote system.
Identifies the type of data displayed in the Chassis ID field on the remote
system.
Identifies the remote 802 LAN device's chassis.
Identifies the type of data displayed in the remote system's Port ID field.
Identifies the physical address of the port on the remote system from which
the data was sent.
Identifies the system name associated with the remote device. If the field is
blank, the name might not be configured on the remote system.