NETGEAR FS728TPv2 Software Administration Manual page 199

Fs728tp software administration manual
Hide thumbs Also See for FS728TPv2:
Table of Contents

Advertisement

FS728TP Smart Switch Software Administration Manual
Field
Broadcast Packets
Transmitted
Total Transmit Errors
Tx FCS Errors
Tx Oversized
Underrun Errors
Total Transmit Packets
Discarded
Single Collision Frames
Multiple Collision Frames
Excessive Collision Frames A count of frames for which transmission on a particular interface fails due to
Port Membership Discards
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
MSTP BPDUs Received
MSTP BPDUs Transmitted
802.3x Pause Frames
Transmitted
EAPOL Frames Received
EAPOL Frames
Transmitted
Time Since Counters Last
Cleared
Use the buttons at the bottom of the page to perform the following actions:
Description
The total number of packets that higher-level protocols requested be
transmitted to the Broadcast address, including those that were discarded or
not sent.
The sum of Single, Multiple, and Excessive Collisions.
The total number of packets transmitted that had a length (excluding framing
bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but
had a bad Frame Check Sequence (FCS) with an integral number of octets
The total number of frames that exceeded the max permitted frame size. This
counter has a max increment rate of 815 counts per second at 10 Mb/s.
The total number of frames discarded because the transmit FIFO buffer
became empty during frame transmission.
The sum of single collision frames discarded, multiple collision frames
discarded, and excessive frames discarded.
A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by exactly one collision.
A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by more than one collision.
excessive collisions.
The number of frames discarded on egress for this port due to egress filtering
being enabled.
Number of STP BPDUs received at the selected port.
Number of STP BPDUs transmitted from the selected port.
Number of RSTP BPDUs received at the selected port.
Number of RSTP BPDUs transmitted from the selected port.
Number of MSTP BPDUs received at the selected port.
Number of MSTP BPDUs transmitted from the selected port.
A count of MAC Control frames transmitted on this interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
The number of valid EAPOL frames of any type that have been received by
this authenticator.
The number of EAPOL frames of any type that have been transmitted by this
authenticator.
The elapsed time, in days, hours, minutes, and seconds since the statistics for
this port were last cleared.
Chapter 6: Monitoring the System
| 199

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs728tp smart switch

Table of Contents