Local Information - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Field
Location Information
This section of the page specifies if location TLV is received in LLDP frames on this port.
Sub Type
Location Information
Extended PoE
This section of the page specifies if the remote device is a PoE device.
Device Type
Extended PoE PSE
This section of the page specifies if extended PSE TLV is received in LLDP frame on this port.
Device Type
Power Source
Power Priority
Power Value
Extended PoE PD
This section of the page specifies if extended PD TLV is received in LLDP frame on this port.
Device Type
Power Source
Power Priority
Power Value

Local Information

Use the LLDP Local Information page to view the data that each port advertises through
LLDP.

To view local LLDP information:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
Description
Specifies the type of location information.
Specifies the location information as a string for a given type of location ID.
Specifies the remote device's PoE device type connected to this port.
Specifies the remote device's PoE device type connected to this port.
Specifies the remote port's PSE power source.
Specifies the remote port's PSE power priority.
Specifies the remote port's PSE power value in tenths of watts.
Specifies the remote device's PoE device type connected to this port.
Specifies the remote port's PD power source.
Specifies the remote port's PD power priority.
Specifies the remote port's PD power requirement.
Configure System Information
90
Change the Default IP Address of the