Internal Microphone - Toshiba TECRA M5 Maintenance Manual

4.13 Internal microphone

4.13 Internal microphone
Removing the Internal microphone
To remove the internal microphone, follow the steps below and refer to Figure 4-24.
1. Peel off the glass tape and disconnect the microphone cable from the connector
CN6050 on the sound board.
2. Remove the internal microphone with a microphone holder from the slot.
3. Separate the internal microphone and the microphone holder.
Installing the Internal microphone
To install the internal microphone, follow the steps below and refer to Figure 4-24.
1. Set the internal microphone into the microphone holder.
2. Install the internal microphone with a microphone holder to the slot.
3. Connect the microphone cable to the connector CN6050 on the sound board and stick
the glass tape in place.
TECRA M5 Maintenance Manual (960-542)
Sound board
Figure 4-24 Removing the internal microphone
4 Replacement Procedures
CN6050
[CONFIDENTIAL]
Glass tape
Microphone
holder
Internal
microphone
4-39