Installing The Bluetooth Module - Toshiba TECRA A9 Series Maintenance Manual

Hide thumbs Also See for TECRA A9 Series:

Table of Contents

4 Replacement Procedures

Installing the Bluetooth module

To install the Bluetooth module, follow the steps below and refer to Figure 4-12.

1. Connect the Bluetooth cable to the connector CN4400 on the system board.

2. Stick a new insulator that prevents a waterdrop from entering the computer.

NOTE: Do not reuse the removed insulator.

3. Connect the Bluetooth cable to the connector on the Bluetooth module.

4. Install the Bluetooth module to the slot until the hook latches.

5. Connect the Bluetooth antenna cable to the connector on the Bluetooth module.

4-24 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)

4.8 Bluetooth module

Show Quick Links

Table of Contents