Bluetooth Module - Toshiba PORTEGE M400 Maintenance Manual

4.9 Bluetooth module

4.9
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below. (See Figure 4-16.)
CAUTION: Do not try to remove the Bluetooth module with the computer turned on.
1. Peel off the insulator and spacer.
2. Disconnect the Bluetooth antenna cable from the Bluetooth module using an
3. Disconnect the Bluetooth cable from the connector CN4400 on the system board.
4. Remove the Bluetooth module from the slot and disconnect the Bluetooth cable
Bluetooth antenna cable
PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com

Bluetooth module

You can damage the computer or Bluetooth module. Do not touch the
connectors on the Bluetooth module on the computer. Debris on the
connectors may cause Bluetooth access problems.
antenna coaxial cable disconnector.
from the connector on the Bluetooth module.
Spacer
Bluetooth module
Figure4-16 Removing the Bluetooth module
4 Replacement Procedures
Insulator
Bluetooth cable
CN4400
[CONFIDENTIAL] 4-27